Hover to zoom
Brass Metal and Gold Cord Ends
Brass metal and gold cord ends. They give drawcord tips a premium look and added strength.
- Product groups
- Drawcords
- Cord end
- Brass metal / Gold
- Production
- Istanbul · Custom colors and sizes for your brand
Brass metal and gold cord ends are small but defining accessories that both protect drawcord tips and lift the product’s overall perception to a higher segment. At Elif Tekstil Aksesuarları in Istanbul, we offer brass-bodied cord ends with natural metal or gold-tone plating options, sized to your drawcord’s diameter and ready for press-crimping. You can source the cord ends as separate parts or as a finished product attached to drawcords.
Request a quoteBrass Body
An alloy of copper and zinc, brass is far more resistant to rust than iron-based materials. Because it shapes easily, it closes tightly without cracking when crimped onto a drawcord and stays in place for a long time.
Gold-Tone Plating
Gold plating applied to the brass surface gives the cord end a warm, lustrous metallic tone. Glossy, matte or satin surface effects are determined at the sample stage according to your collection’s design language.
Secure Press Connection
The cord end is crimped onto the tip of the drawcord with a press at even pressure. The right inner diameter and compression setting prevent the cord end from slipping, rotating or coming off the drawcord during pulling and washing.
Laser Logo Option
Your brand name, logo or a short slogan can be laser-engraved on the cord end surface. This permanent marking turns even a small detail like a drawstring into a carrier of brand identity.
A good cord end does more than close off the tip of a drawcord; it carries your brand’s claim to quality to the user’s fingertips.
From Brass to Gold Gleam: Anatomy of a Cord End
The cord end is the most handled and most noticeable point of a drawcord. That is why material choice affects not just appearance but also the product’s service life directly. Brass is an alloy formed by combining copper and zinc; it is easy to work and resistant to corrosion. The reddish rust stains that can appear over time on iron cord ends from moisture and sweat do not form on brass, and the risk of staining around the tip is reduced even on light-colored drawcords. The material’s substantial weight helps the drawcord hang neatly from the hood or waist casing and leaves a feeling of quality in the user’s hand.
A gold cord end is achieved by applying a metallic plating over the brass body. Because brass’s own yellowish color forms a natural base under the gold plating, contrast is less noticeable if scratches occur, and the product looks cohesive for longer. The plating tone can be planned in different nuances such as light yellow gold, dark gold or antique gold. Whether the surface has a glossy, matte or satin finish markedly changes the character of the cord end. A protective lacquer layer applied over the plating on request forms an extra barrier against sweat and abrasion, helping the shine last longer.
The quality of a cord end is completed by how it is attached to the drawcord. After being placed on the tip of the drawcord, brass cord ends are compressed around their circumference with a press machine; in the industry, this process is known as crimping. A correct match between inner diameter and cord diameter, even distribution of pressure and proper preparation of the cord tip beforehand are the three key factors that determine the strength of the connection. Crimping that is too loose can cause the cord end to slip, while overly tight crimping can crack the plating or crush the drawcord. That is why the press setting is trialed on a sample for each new drawcord and cord end pairing, and bulk production proceeds with the approved values.
Brass Metal and Gold Cord Ends technical details
Values indicate typical production ranges; final size, color and material are confirmed upon sample approval.
- Product type
- Drawcord end
- Body material
- Brass (copper-zinc alloy)
- Color options
- Natural brass / Gold
- Gold tone nuances
- Light, dark, antique; on request
- Surface finish
- Glossy / Matte / Satin
- Protective layer
- Lacquer, on request
- Inner diameter
- According to cord diameter
- Length
- By model, on request
- Assembly method
- Press-crimped
- Logo
- Laser engraving / logo
- Supply form
- Separate part or attached to drawcord
- Compatible drawcords
- Filled polyester and cotton
Where is it used?
Key applications for Brass Metal and Gold Cord Ends.
Premium Hoodie Drawcords
On upper-segment hoodies, a gold cord end turns the tip of the drawcord from a simple drawstring into an eye-catching design element and raises the product’s shelf appeal.
Tracksuit Waist Drawcords
On tracksuit sets, a brass cord end adds weight to the waist drawcord so it hangs neatly, and its rust-resistant structure keeps the tip looking good despite frequent washing.
Bags and Accessories
On drawstring pouches, leather bags and cosmetic bags, drawstrings with gold cord ends harmonize with metal buckles, completing the product’s overall metal trim language.
Shoes and Sneakers
On special-edition sneakers and boots, metal-tipped laces stand out as a subtle luxury detail that sets the shoe apart, carrying a collection signature with a laser logo.
Packaging and Gift Boxes
On premium packaging that uses ribbons and cords, a gold cord end enriches the unboxing experience and leaves a lasting impression in brand presentation.
Jackets and Coats
On overcoats, trench coats and quilted jackets, adding brass cord ends to waist or hood adjustment drawcords creates a cohesive look with metal button and zipper details.
Customization Options for Brass Cord Ends
The same brass body can take on very different characters depending on plating tone, surface finish and marking choices. We finalize the options below together with you at the sample stage so they harmonize with the other metal trims in your collection.
About custom manufacturing- 01
Natural Brass
Unplated, or protected only with clear lacquer, brass offers a vintage metal tone that matures slightly over time. It creates a genuine, authentic look in denim, workwear and retro-inspired collections.
- 02
Glossy Gold
A near-mirror gold surface creates a powerful, light-catching accent in luxury and evening collections. It is the highest-contrast option on dark grounds such as black, navy and burgundy.
- 03
Matte and Satin Gold
A matte or satin finish that diffuses light makes the gold tone look calmer and more modern. For brands with a minimalist, quiet-luxury direction, it is an alternative that also reduces the visibility of fingerprints and scratches.
- 04
Laser Logo and Lettering
A brand name, monogram or collection code is laser-engraved around the cord end. Letter height and position are set so the marking is legible, based on the cord end’s length and the direction in which the drawcord hangs.
- 05
Delivered Attached to Drawcord
Instead of separate parts, you can receive the cord ends crimped onto drawcords cut to the approved length. This option eliminates the need for press equipment on your sewing line and the waste caused by assembly.
Brass vs. Iron vs. Plastic Cord Ends
Cord end material directly determines the balance of appearance, weight, durability and budget. The table compares brass cord ends with the iron and plastic cord ends widely used in the industry across key criteria to help you make the right choice.
| Criterion | Brass / gold cord end | Iron cord end | Plastic cord end |
|---|---|---|---|
| Rust behavior | Rustproof, may tarnish over time | May rust if coating is damaged | Rustproof |
| Weight and feel | Substantial, weighty | Medium | Light |
| Visual perception | Premium, luxurious | Standard metal | Sporty, colorful |
| Plating base | Yellow base suited to gold | Gray base, shows when scratched | No plating, mass-dyed |
| Laser logo | Suitable | Suitable depending on coating | Limited |
| Cost positioning | Upper segment | Economical | Economical |
From request to delivery, step by step
We stay in touch with you at every stage and never move on to the next step without your approval.
- 1
Size and Fit Analysis
We review the diameter and braid structure of the drawcord you will use and the position of the cord end on the finished product. If needed, we take a sample of your drawcord and set the cord end’s inner diameter and length accordingly.
- 2
Tone and Surface Selection
You decide after seeing tone options such as natural brass, light or dark gold side by side with glossy, matte and satin finishes. Tone harmony with the other metal trims in the collection is also checked at this stage.
- 3
Logo Sample
Sample cord ends with laser logo or lettering are prepared, crimped onto drawcord and sent to you. Logo legibility, plating appearance and the cord end’s shape after pressing are assessed together on this sample.
- 4
Production and Press Setting
Cord ends are produced in the approved size and tone. For orders attached to drawcords, press pressure is set to the value determined on the sample, and crimp security is verified throughout production with manual pull checks.
- 5
Sorting and Shipping
Cord ends are packed in separate packaging to keep the plating from getting scratched, while attached drawcords are packed by model and length. Domestic or export shipping is organized according to your project plan.
Care and Inspection of Brass and Gold Cord Ends
- Keep cord ends in their original packaging until use, away from moisture and chemical fumes.
- After pressing, check by hand that the cord end sits straight on the drawcord axis and does not rotate.
- Inspect the gold surface under light for any cracks, dents or plating chips caused by crimping.
- Slight tarnishing that may develop over time on natural brass is in the nature of the material; a lacquer layer slows this process.
- It is recommended to state on the product care label that bleach and aggressive chemicals should be avoided.
- To protect the plating, recommend washing products inside out and inside a laundry bag.
Brass Metal and Gold Cord Ends: your questions answered
Can’t find the answer you’re looking for? Our team is happy to help.
Are gold cord ends made of real gold?
No, the name gold cord end refers to its color and surface appearance. The body is made of brass, and a gold-tone metallic plating is applied over it. This method offers the look of gold at a reasonable cost for a textile accessory while retaining the durability of brass. Plating tone, gloss level and any protective layer are determined according to your project and submitted for your approval on a sample.
Do brass cord ends rust?
Since brass is a copper-zinc alloy that contains no iron, the reddish rust seen on iron cord ends does not form. However, a natural brass surface may tarnish or dull slightly over time due to air, moisture and sweat. Gold plating and a protective lacquer applied on request largely limit this interaction. If you share your conditions of use, we determine the most suitable surface solution together.
How is the cord end attached to the drawcord?
The cord end is slipped onto the tip of the drawcord and then attached by compressing it around its circumference with a press machine; this process is called crimping. The strength of the connection depends on how well the cord end’s inner diameter fits the drawcord and on correct press pressure setting. You can buy cord ends as separate parts and crimp them on your own line, or receive them as a finished product attached to drawcords.
Which drawcord diameters do you make cord ends for?
The cord end inner diameter is determined by the diameter and braid structure of the drawcord to be used. Various inner diameter and length options can be prepared for the round filled drawcords commonly used for hood and waist drawstrings. For the most accurate result, we recommend sending a sample of your drawcord; our design team sizes the cord end to this sample and prepares a prototype.
Can a logo be applied to brass cord ends?
Yes, brass and gold cord ends are suitable for laser lettering and logo applications. A brand name, monogram or collection code can be permanently engraved around the cord end. Logo size is adjusted with the cord end’s surface area and legibility in mind. A logo sample is prepared so you can see the final result, and bulk production is planned upon approval of this sample.
Does gold plating wear off over time?
Like any metal plating, gold plating can wear thin over time with heavy abrasion, contact with hard surfaces and aggressive chemicals. The yellowish tone of the brass body reduces contrast where wear occurs, helping the appearance stay cohesive for longer. A protective lacquer layer and proper care instructions extend the life of the plating; we recommend sharing your usage expectations from the outset.
Can I buy brass cord ends wholesale as separate parts?
Yes. We supply brass metal and gold cord ends wholesale as separate parts for manufacturers who use their own drawcords. If you prefer, you can also receive them as a set together with drawcords produced by Elif Tekstil Aksesuarları, cut to length with the cord ends already crimped on. Order quantity and packing method are planned according to your project; we ship both domestically and for export.
You may also like.
Drawcords
32-Spindle Polyester Filled Drawcord
View
Drawcords
32-Spindle Filled Polyester Drawcord
View
Drawcords
48-Spindle Flat Polyester Drawcord
View
Drawcords
Colored and Black Filled Polyester Drawcord with Brass Cord Ends
View
Drawcords
Tight-Braid Filled Black Polyester Drawcord
View
Drawcords
Drawcord with Gold and Silver Cord Ends
View
Drawcords
Printed Iron Cord End
View
Drawcords
Drawcord with Macaron and Plain Cord Ends
View